Electrical
CFL Bulbs, Why and How to Recycle
May 3, 2011 by reeis · Leave a Comment
In my profession, one of the most common questions that I get is do CFL bulbs really make that much of a difference and why should I switch? This can be looked at in many different ways but here are some points that I feel are key.
- Saves 40.00 in electricity costs over its lifetime
- Uses 75% less energy than incandescent bulbs and lasts ten times longer
- Produces 75% less heat
The important thing is to recognize where to install them to get these benefits. It’s recommended to install them in heavy traffic areas such as the kitchen, living room and recreational rooms. Also, to make them the most effective they should be left on for a minimum of 10 minutes as frequent turning off and on will shorten their life span. Typically a CFL bulb costs 5.00 and lasts 10,000 hours whereas, the cost of a regular incandescent bulb is in the area of 0.75 and lasts 1,000 hours. Over time, you will save some money on buying the bulbs but also the energy savings as well. If you aren’t convinced yet, then maybe our friends at Energy Star can help because this is staggering, “If every American home replaced just one light with a light that’s earned the ENERGY STAR, we would save enough energy to light 3 million homes for a year, save about $600 million in annual energy costs, and prevent 9 billion pounds of greenhouse gas emissions per year, equivalent to those from about 800,000 cars.”
Finally, one of the most important things to remember is how to recycle them because they do contain a little bit of mercury. First and foremost, don’t put them in your regular trash can instead take them to Home Depot of you can use this friendly website to locate a place near you. www.earth911.org Another fantastic site that can help with safe containers for recycling in the home, office or commercial sites is personal friends of mine at www.buschsystems.com
Phantom Loads
April 26, 2011 by reeis · Leave a Comment
A phantom load is simply described as the unintentional use of electricity by electronics, even when they are shut off. Examples include cell phone chargers, laptops and entertainment components.
Combating this problem is simple if you are willing to take the extra time. All you have to do is turn off your computer, monitors, printers and other devices when they’re not in use. Whereas, if your charging units are not being used, be sure to unplug them from your outlets. Power strips are definitely a better solution.
Eliminating wasteful draws on electricity can have a big impact:
- Devices that draw around 20 watts in stand-by mode may add up to a couple of dollars a month to your utility bill.
- A typical U.S. home has thirty to forty products constantly drawing power.
- Phantom loads equate to approximately10% of residential electricity use.
Be especially conscious of these wasteful culprits:
- Digital picture frames
- Large screen televisions
- DVD players, video game systems and other home theater components
- Microwaves and toasters
It might not seem like a large amount of money at first but remember these are the simple steps that you can do on a daily basis that help reduce energy usage and put a few extra bucks back into your wallet.
Tips to Avoid Energy-Efficiency Scams
April 12, 2011 by reeis · Leave a Comment
We’re all trying to save money on energy bills these days. Plenty of people who sell energy-saving products are willing to take unfair advantage of you in your quest to save a buck. You won’t save any money or energy if you buy products from people who make false claims. When it comes to purchasing air-conditioners, insulation, roofing and even AC services, we homeowners have to do our homework before we start writing checks. Don’t let a salesperson mislead you into spending too much or buying an ineffective product because you don’t have the facts.
Here are a few ways homeowners get scammed when it comes to energy efficiency because of actions by sales reps.
1. They sell you more than you need. As we gear up for another scorching Arizona summer, there are a lot of ads for companies that want to over-insulate your attic to a level of R-60, which won’t save you any more money on air-conditioning bills than the recommended R-38. In fact, there’s a good chance you don’t even need new insulation at all. Most homes have plenty of insulation, but it’s poorly installed or has been knocked out of place. Reattaching it to the floors, ceilings and walls it’s meant to protect could save you a bundle of money – both on replacement product and on energy bills.
2. They convince you that high-tech is better than common sense. The least-expensive way to slash your energy bills is to reach for the “low-hanging fruit” in your house – small, low-cost improvements. Instead of getting hooked into buying an expensive package of multiple new systems, start your energy campaign by sealing your air-conditioner’s ducts, caulking windows and doors and checking weather stripping. Have an energy audit to determine if your attic is properly and passively ventilated and that your insulation is well-installed. That will help you more than investing thousands of dollars in optional equipment.
3. They can’t prove the claims. It’s illegal to say a product will slash energy bills, insulate your attic or reduce heat gain without tests to back up the claim. Ask for the research….if the product has passed these tests, you can be sure the manufacturer will have that information all over its website. Bottom line, if you can’t find it? Don’t buy it.
4. They insist bigger is better. This is a common claim when it comes to buying an air-conditioner. It used to be that bigger homes needed larger AC units. Newer homes are so tight, however, that they need far less powerful systems than older homes with lots of air leaks. Find an AC rep that will get a lot of information about your house, the weather and your family’s lifestyle – and use a computer to calculate the size of your new air-conditioner. If that’s not happening, find a different contractor.